How to Make a DIY WaterProof FPV Camera
The Idea of this project started with an FPV Boat Crash that made some magic smoke on the water and destroyed his FPV Camera & System
We came up with a Simple Idea by placing it all in a Go Pro Case and Just Epoxy the gaps around the FPV Antenna and Power supply
This the first prototype and for that reason, we used the Cheapest FPV System you can Buy
The things you need are a Camera, 5.8Ghz Mini VTX, Polarized antenna, Go Pro Case, VTX Cable, JST plug, Heat Shrink and waterproof Epoxy total cost 22$
you need to drill 3mm and 5.5mm Hole for the wires and the Antenna
It´s smart to start using a 1mm drill bit and work your way up to the correct size you need to prevent the plastic go pro case to Crack
Just Watch the Video From the Beginning to the End and you get all the Tips & Tricks to make your Own
Reviews FPV Drones Rc Cars Scratch Built Planes and Boats Helping the Comunnity with How To's & DIY Projects